Difference between revisions of "HMMER"
(→Compilation) |
(→Compilation) |
||
Line 49: | Line 49: | ||
Benchmarks at [http://www.nsc.liu.se NSC] have shown that Intel compilers seem to produce more efficient HMMER binaries than does gcc. | Benchmarks at [http://www.nsc.liu.se NSC] have shown that Intel compilers seem to produce more efficient HMMER binaries than does gcc. | ||
− | HMMER-2 is also extremely sensitive to hardware vectorisation optimisations, even to the extent that -xSSE4.2 produces significantly faster binaries than does -xSSE4.1, so it makes sense to set this as aggressively as possible. | + | HMMER-2 is also extremely sensitive to hardware vectorisation optimisations, even to the extent that -xSSE4.2 produces significantly faster binaries than does -xSSE4.1, so it makes sense to set this as aggressively as possible. NSC uses icc 11.1.069 and <code>CFLAGS="-O3 -ip -xSSE4.2"</code> for the SNIC systems [http://www.nsc.liu.se/systems/snic/ Kappa] and [http://www.nsc.liu.se/systems/snic/ Matter], and <code>CFLAGS="-O3 -ip -xSSSE3"</code> for [http://www.nsc.liu.se/systems/snic/ Neolith]. |
The official binary distribution of HMMER-3.0 is compiled with icc, and is fully adequate for threaded operation. However, some of the HMMER-3 binaries (e.g. hmmscan) have been shown to perform upward of 50% better with MPI parallelisation, so this may constitute reason to recompile locally. It may also be profitable to carefully select MPI library, as intelmpi in standard configuration can give fluctuations in runtime upwards of ~100% with hmmsearch, while openmpi seemingly performs optimally and consistently. For HMMER-3, [http://www.nsc.liu.se NSC] uses icc 11.1.069 and openmpi 1.4.1, and uses the compilator flags automatically detected by the configure script. | The official binary distribution of HMMER-3.0 is compiled with icc, and is fully adequate for threaded operation. However, some of the HMMER-3 binaries (e.g. hmmscan) have been shown to perform upward of 50% better with MPI parallelisation, so this may constitute reason to recompile locally. It may also be profitable to carefully select MPI library, as intelmpi in standard configuration can give fluctuations in runtime upwards of ~100% with hmmsearch, while openmpi seemingly performs optimally and consistently. For HMMER-3, [http://www.nsc.liu.se NSC] uses icc 11.1.069 and openmpi 1.4.1, and uses the compilator flags automatically detected by the configure script. |
Revision as of 08:14, 24 March 2011
HMMER is a software package for working with profile hidden Markov models (HMM) of known regions in proteins.
Responsible person: User:Joel Hedlund (NSC)
Contents
General info
An HMM is a statistical model that describes the known sequence variations within a specific group of proteins that may be of special interest; for example a protein family with known function, or a domain containing a well studied interaction surface or an active site. HMM is a machine learning technique [1] where the models are built from training examples that are known good members, and where the finished models can be used to reliably classify and annotate new or poorly understood protein sequences in an automated fashion. Large libraries of trusted HMMs (such as Pfam) are of course immensely beneficial, as they can be used to automatically classify large portions of newly sequenced genomes, directly as they become available.
The HMMER package contains applications for working with HMMs, for example for:
- Building and calibrating HMMs.
- Matching an HMM against a sequence database (for finding new members).
- Matching a sequence against an HMM database (for finding new sequence features).
Versions
There are two verions of HMMER that can conceivably be useful:
- HMMER-2.3.2: Old stable version.
- HMMER-3.0: Fast, but backwards incompatible and non-feature-complete.
Their implementations and output (and potentially also the actual results) are vastly different, so ongoing projects are not recommended to switch between them. For new project, it is highly recommended to spend some time to deduce which version is the most suitable.
HMMER-3 may seem like an obvious choice; it is much faster than its predecessor and it is currently used in large scale production (e.g. by Pfam), and it is also promoted as the official main HMMER version. However, HMMER-3.0 is not feature complete. Especially, the old default alignment behavior (glocal, hmm_ls) is missing, so if this feature is necessary: choose HMMER-2.3.2.
Computational considerations
Work locally
Many of the features in HMMER require access to database flatfiles, and standard practice when running a compute cluster is to copy all necessary files to a node local directory before any work is done with them. This behaviour is highly encouraged on most resources, since multiple simultaneous accesses to the same large files on a shared disk is likely to cause problems for all computations currently running on the resource, and not only for the owner of the badly behaving jobs. For this reason, most SNIC resources have amenities in place to aid you in running your HMMER jobs in an optimal manner (for example prepare_db
and $HMMER_DB_DIR
, described for example here).
Do not run out of memory
If possible, you should ensure that you have enough RAM to hold the database as well as the results and still have some headroom. This ensures that HMMER will not need to read data from disk unnecessarily, which otherwise would cause significant slowdown. This is less important with HMMER-2.3.2, since the HMM-sequence alignment implementation is so CPU intensive that memory and disk considerations are less likely to have an impact on runtime. Nevertheless, ensuring that the database files remain cached can be done for example by:
- Choose a system with enough RAM
Multiprocessor systems generally have more memory than single processor systems, and the database will also require proportionally less memory, since only one copy is needed in the OS file cache regardless of the number of processors using it. - Partition the search space
For huge databases or very restricted amounts available memory it may be required to split the database into manageable chunks and process them as separate jobs.
Use your processors wisely
Users should not have to worry about this since the HMMER default behaviour is to run on all the CPU cores it can detect on the compute node, which is nearly always the most desirable. However, should you need to control this for any reason, the behaviour can be controlled by the --ncpus
command line option, or the $HMMER_NCPUS
environment variable, which should already be set to the correct value if you are using a preinstalled HMMER version on a SNIC resource.
Compilation
Benchmarks at NSC have shown that Intel compilers seem to produce more efficient HMMER binaries than does gcc.
HMMER-2 is also extremely sensitive to hardware vectorisation optimisations, even to the extent that -xSSE4.2 produces significantly faster binaries than does -xSSE4.1, so it makes sense to set this as aggressively as possible. NSC uses icc 11.1.069 and CFLAGS="-O3 -ip -xSSE4.2"
for the SNIC systems Kappa and Matter, and CFLAGS="-O3 -ip -xSSSE3"
for Neolith.
The official binary distribution of HMMER-3.0 is compiled with icc, and is fully adequate for threaded operation. However, some of the HMMER-3 binaries (e.g. hmmscan) have been shown to perform upward of 50% better with MPI parallelisation, so this may constitute reason to recompile locally. It may also be profitable to carefully select MPI library, as intelmpi in standard configuration can give fluctuations in runtime upwards of ~100% with hmmsearch, while openmpi seemingly performs optimally and consistently. For HMMER-3, NSC uses icc 11.1.069 and openmpi 1.4.1, and uses the compilator flags automatically detected by the configure script.
Links
- Official website
- HMMER-3 documentation
- HMMER-2.3.2 release (contains pdf documentation)