Difference between revisions of "User:Torben Rasmussen (NSC)/SweGrid old/Grid certificates"

From SNIC Documentation
Jump to: navigation, search
(Created page with "A certificate is the equivalent of a passport in real-life. In the same way you have prove your credentials when you aquire a passport the same is true for a certificate. An Cert...")
 
 
(62 intermediate revisions by 5 users not shown)
Line 1: Line 1:
−
A certificate is the equivalent of a passport in real-life. In the same way you have prove your credentials when you aquire a passport the same is true for a certificate. An Certificate Authority (CA) has to vouch for your identity and sign your certificate.
+
A certificate is the equivalent of a passport in real-life. In the same way you have prove your credentials when you aquire a passport the same is true for a certificate. A Certificate Authority (CA) has to vouch for your identity and sign your certificate.
  
 
A certificate consist of 2 parts a private key and a public key. The private is your secret and should be kept as secure as possible. The public key is used to verify signatures are signed with your private key for the receiving part. The public part is also used to verify that the certficate is correct when you have the public part of the CA certificate.
 
A certificate consist of 2 parts a private key and a public key. The private is your secret and should be kept as secure as possible. The public key is used to verify signatures are signed with your private key for the receiving part. The public part is also used to verify that the certficate is correct when you have the public part of the CA certificate.
  
−
For more information regarding certificates and public key cryptography: [http://en.wikipedia.org/wiki/Public-key_cryptography [http://en.wikipedia.org/wiki/Public-key_cryptography http://en.wikipedia.org/wiki/Public-key_cryptography]] [http://en.wikipedia.org/wiki/Public_key_certificate [http://en.wikipedia.org/wiki/Public_key_certificate http://en.wikipedia.org/wiki/Public_key_certificate]]
+
For more information regarding certificates and public key cryptography:
 +
 
 +
[http://en.wikipedia.org/wiki/Public-key_cryptography http://en.wikipedia.org/wiki/Public-key_cryptography]
 +
 
 +
[http://en.wikipedia.org/wiki/Public_key_certificate http://en.wikipedia.org/wiki/Public_key_certificate]
 +
 
 +
[http://www.nordugrid.org/documents/certificate_howto.html http://www.nordugrid.org/documents/certificate_howto.html]
 +
 
 +
= Requesting a certificate =
 +
== Requesting a certificate using the Terena eScience Portal ==
 +
 
 +
The Terena eScience Portal is a joint effort to provide users with a tool for requesting grid-certificate with the credentials from their home-institution or university. 
 +
 
 +
To request a Terena eScience Certificate go to the following URL:
 +
 
 +
[https://tcs-escience-portal.terena.org https://tcs-escience-portal.terena.org]
 +
 
 +
The procedure is as follows:
 +
 
 +
1. Click "Login"
 +
2. Click on Sweden in the map.
 +
3. Choose your identity provider in the drop down box.
 +
4. Login using your credentials from your identity provider.
 +
 
 +
You should now arrive to a "home" page that shown below:
 +
 
 +
[[File:terena1.png|600px]]
 +
 
 +
5. Click on the "My certificates" link in the top left side of the page. You should then arrive to a page from which you will create and manage your certificates.
 +
 
 +
[[File:terena2.png|600px]]
 +
 
 +
6. To create a new certificate, click on the "New certificate" link and follow the instructions. When the process is completed your certificate will be listed on the same page.
 +
 
 +
7. Install the signed certificate in your browser by clicking on the "Install in keystore" link. This will install the certificate in the key-store of your browser.
 +
 
 +
=== Exporting Terena certificate for use with Grid tools ===
 +
 
 +
To use the Terena certificates with the ARC grid client they have to be exported from the browser and converted into a suitable format. To export and convert a certificate installed the following procedure can be used:
 +
 
 +
1. Export the installed certificate from the browser in the PKCS12 format. In Firefox this is accomplished from the Options/Advanced/Encryption Dialog, shown below:
 +
 
 +
[[File:browser1.png|400px]]
 +
 
 +
To show all installed certificate click on the "View Certificates" buttton. This will shown the following dialog:
 +
 
 +
[[File:browser2.png|400px]]
 +
 
 +
To backup your newly created certificate select the Terena certificate and click on the "Backup" button in the previous dialog. This brings up a dialog for selecting a filename and location for the certificate. Save your certificate in a good location. The file with be given the extension .p12 indicating that it is a PKCS12 certificate. When the location has been selected another dialog is shown asking for a export password. This password will protect the certificate and private key. As show in the next figure:
 +
 
 +
[[File:browser3.png|400px]]
 +
 
 +
Use the password quality meter to choose a strong password for the exported certificate and private key.
 +
 
 +
2. Converting the PKCS12 certificate to a format suitable for use with grid clients (PEM)
 +
 
 +
Create a directory, .globus, in your home directory.
 +
 
 +
Linux / Unix:
 +
 
 +
$ cd ~
 +
$ mkdir .globus
 +
$ cd .globus
 +
 
 +
In windows
 +
 
 +
C:\...\>cd C:\Users\<username>
 +
C:\...\>mkdir .globus
 +
C:\...\>cd .globus
 +
 
 +
Using the "openssl" command we now convert the exported certifcate to the correct format. '''Windows users:''' OpenSSL for Windows is available [http://www.openssl.org/related/binaries.html here].
 +
 
 +
The first step is to convert the private key. The openssl command will first ask for the password chosen when the certificate was exported ("Enter Import Password:"). In the next step the pass phrase for the exported private key is chosen ("Enter PEM pass phrase:"). Please choose a strong passphrase.
 +
 
 +
openssl pkcs12 -nocerts -in usercert.p12 -out userkey.pem
 +
Enter Import Password:
 +
MAC verified OK
 +
Enter PEM pass phrase:
 +
Verifying - Enter PEM pass phrase:
 +
 
 +
In the next step the certificate is converted. In the same way as with the private key we have to specify the export password again ("Enter Import Password:").
 +
 
 +
openssl pkcs12 -clcerts -nokeys -in usercert.p12 -out usercert.pem
 +
Enter Import Password:
 +
MAC verified OK
 +
 
 +
Before we can use the private key with or client tools the permissions on the private key file (userkey.pem) has to changed to a more restrictive setting (Linux/Unix):
 +
 
 +
chmod 400 userkey.pem
  
 
== Requesting a certificate with ARC tools ==
 
== Requesting a certificate with ARC tools ==
  
−
The first step in aquiring a certificate is to create a certificate request. This is done using the <tt>grid-cert-request -int</tt> command. (The -int options means interactive usage). When issued, the tool will generate a certificate request and a private key. The tool will also ask for a password to protect the private key. Note, if the password is lost a new certificate must be obtained. The process is shown below:
+
The first step in aquiring a certificate is to create a certificate request. This is done using the '''grid-cert-request -int''' command. (The -int options means interactive usage). When issued, the tool will generate a certificate request and a private key. The tool will also ask for a password to protect the private key. Note, if the password is lost a new certificate must be obtained. The process is shown below:
  
 
First the private key is generated:
 
First the private key is generated:
Line 24: Line 112:
 
....................++++++
 
....................++++++
 
writing new private key to '/home/jonas/.globus/userkey.pem'</pre>
 
writing new private key to '/home/jonas/.globus/userkey.pem'</pre>
 +
 
To protect the private key from unauthorized access it is encrypted using a pass phrase. If this pass phrase is empty, anyone with access to your private key and certificate can gain access to the resources you have been granted. The pass phrase should also be different from your normal login password, so if your local system has been compromised the private key is still protected.:
 
To protect the private key from unauthorized access it is encrypted using a pass phrase. If this pass phrase is empty, anyone with access to your private key and certificate can gain access to the resources you have been granted. The pass phrase should also be different from your normal login password, so if your local system has been compromised the private key is still protected.:
  
Line 36: Line 125:
 
Level 0 Organization Name (do not modify) [Grid]:
 
Level 0 Organization Name (do not modify) [Grid]:
 
Level 1 Organization Name (do not modify) [NorduGrid]:</pre>
 
Level 1 Organization Name (do not modify) [NorduGrid]:</pre>
 +
 
The following questions regards your affiliation domain and your email. It is important that your domain and the domain in the email address is the same.:
 
The following questions regards your affiliation domain and your email. It is important that your domain and the domain in the email address is the same.:
  
Line 42: Line 132:
 
Email address (e.g., h.c.andersen@example.org) []:joe.user@
 
Email address (e.g., h.c.andersen@example.org) []:joe.user@
 
mydomain.org</pre>
 
mydomain.org</pre>
 +
 
Finally the private key and a certificate request are generated.:
 
Finally the private key and a certificate request are generated.:
  
Line 67: Line 158:
 
you receive no response, contact NorduGrid Certification Authority
 
you receive no response, contact NorduGrid Certification Authority
 
at ca@nbi.dk</pre>
 
at ca@nbi.dk</pre>
−
The result of the command are 3 files <tt>userkey.pem</tt> , <tt>usercert.pem</tt> and <tt>usercert_request.pem</tt> in a subdirectory called <tt>.globus</tt> in the user home directory. The <tt>userkey.pem</tt> your private key and should not be world readable. This can be achieved by using <tt>chmod 400 userkey.pem</tt>.
+
The result of the command are 3 files '''userkey.pem''' , '''usercert.pem''' and '''usercert_request.pem''' in a subdirectory called '''.globus''' in the user home directory. The '''userkey.pem''' your private key and should not be world readable. This can be achieved by using '''chmod 400 userkey.pem'''.
  
−
The contents of the <tt>usercert_request.pem</tt> should be sent by mail to you neareast Registration Authority (RA) by mail. The RA will verify your request and varify your identity. This can involve meeting with the RA and proving your identity with a passport or equivalent documents. The current list of RA:s can be found at the following page:
+
The contents of the '''usercert_request.pem''' should be sent by mail to you neareast Registration Authority (RA) by mail. The RA will verify your request and varify your identity. This can involve meeting with the RA and proving your identity with a passport or equivalent documents. The current list of RA:s can be found at the following page:
  
 
[http://ca.nordugrid.org/ra.html [http://ca.nordugrid.org/ra.html http://ca.nordugrid.org/ra.html]]
 
[http://ca.nordugrid.org/ra.html [http://ca.nordugrid.org/ra.html http://ca.nordugrid.org/ra.html]]
  
−
== Installing certificate ==
+
=== Installing the grid certificate in your browser ===
  
−
When the signed certificate is received from the CA it has to be added to the <tt>usercert.pem</tt> file in the <tt>.globus</tt> directory.
+
When the signed certificate is received from the CA it has to be added to the '''usercert.pem''' file in the '''.globus''' directory.
  
 
The important parts of the mail are shown below::
 
The important parts of the mail are shown below::
Line 84: Line 175:
 
Copy the part shown above into the file <tt>usercert.pem</tt> in the <tt>.globus</tt> directory in your home directory.
 
Copy the part shown above into the file <tt>usercert.pem</tt> in the <tt>.globus</tt> directory in your home directory.
  
−
== Verifying the certificate ==
+
== Requesting a certificate using openssl ==
  
−
To verify that the certificate is correctly installed, issue the following command::
+
If neither the Terena Portal or the ARC tools are available you can use openssl directly to create a certificate request and a private key. Openssl will also ask for a password to protect the private key. Note, if the password is lost a new certificate must be obtained. The process is shown below:
  
−
<pre>$ grid-cert-info -subject
+
$ mkdir -p ~/.globus
−
/O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann</pre>
+
$ openssl req -new -newkey rsa:2048 \
−
This should display your Distinguished Name (DN) of the installed certificate.
+
  -out ~/.globus/usercert_request.pem \
 +
  -keyout ~/.globus/userkey.pem \
 +
  -subj "/O=Grid/O=NorduGrid/OU=nsc.liu.se/CN=Kalle Kula/emailAddress=kalle@nsc.liu.se"
  
−
== Checking certificate expiration ==
+
Modify OU, CN and emailAddress as necessary. It is important that your OU and the domain in the email address is the same.
  
−
To check the expiration date of a certifcate, issue the following command::
+
The result of the command are 2 files '''userkey.pem''' and '''usercert_request.pem''' in a subdirectory called '''.globus''' in your home directory. The '''userkey.pem''' is your private key and should not be world readable. This can be achieved by using '''chmod 400 ~/.globus/userkey.pem'''.
  
−
<pre>$ grid-cert-info -enddate
+
The contents of the '''usercert_request.pem''' should be sent by mail to you neareast Registration Authority (RA). The RA will verify your request and verify your identity. This can involve meeting with the RA and proving your identity with a passport or equivalent documents. The current list of RA:s can be found at the following page:
−
Mar 18 15:10:41 2011 GMT</pre>
 
−
== Creating a proxy certificate ==
 
  
−
To create a shortlived proxy that can be used for authentication with grid services, the <tt>grid-proxy-init</tt> command can be used. A 12 hour (default) proxy is created in the following example::
+
[http://ca.nordugrid.org/ra.html http://ca.nordugrid.org/ra.html]
 +
 
 +
=== Installing the grid certificate in your browser ===
 +
 
 +
When the signed certificate is received from the CA it has to be put into the '''usercert.pem''' file in the '''.globus''' directory.
 +
 
 +
The important parts of the mail are shown below::
 +
 
 +
-----BEGIN CERTIFICATE-----
 +
xasdj ...
 +
-----END CERTIFICATE-----
 +
 
 +
= Requesting membership in the SweGrid VO =
 +
 
 +
To be able to use the SweGrid or Swestore resources a membership in the SweGrid VO and a corresponding group is required. To apply for membership, make sure that your certificate is installed in the browser. Then go to the following URL:
 +
 
 +
[https://voms.ndgf.org:8443/voms/swegrid.se https://voms.ndgf.org:8443/voms/swegrid.se]
 +
 
 +
and follow the instructions. In a couple of hours you will be added to the SweGrid VO.
 +
 
 +
To be added to the correct SNIC project send a mail to [mailto:support@swegrid.se support@swegrid.se] and specify your DN as shown in the Terena portal or from the '''arproxy --info''' command and which SNIC-project to be added to.
 +
 
 +
To be added to the correct Swestore allocation send a mail to [mailto:swestore-support@snic.vr.se swestore-support@snic.vr.se] and specify your DN as shown in the Terena portal or from the '''arproxy --info''' command and which Swestore allocation to be added to.
 +
 
 +
= Proxy certificates =
 +
 
 +
Authentication on the grid is done by using special shortlived proxy certificates, which delegate authentication to specific resources. There are serveral tools available for creating, checking and destroying these proxy certificates.
 +
== ARC 1.0.x ==
 +
=== Creating a proxy certificate ===
 +
 
 +
To create a shortlived proxy that can be used for authentication with grid services, the '''arcproxy''' command can be used. A 12 hour (default) proxy is created in the following example::
 +
 
 +
$ arcproxy
 +
Your identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
 +
Enter pass phrase for /home/jonas/.globus/userkey.pem:
 +
.++++++
 +
.....++++++
 +
Proxy generation succeeded
 +
Your proxy is valid until: 2011-03-11 03:00:14
 +
 
 +
The proxy file itself will be created in the '''/tmp''' directory with the format '''x509up_[uid]''', where uid is the userid number for your user account.
 +
 
 +
In some cases a longer lived proxy will be needed. This is achieved using the '''--constraint''' switch. A 24-hour can be created by issuing the following command:
 +
 
 +
$ arcproxy --constraint="validityPeriod=24H"
 +
Your identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
 +
Enter pass phrase for /home/jonas/.globus/userkey.pem:
 +
....++++++
 +
.....++++++
 +
Proxy generation succeeded
 +
Your proxy is valid until: 2011-03-11 15:03:19
 +
 
 +
$ arcproxy
 +
Your identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
 +
Enter pass phrase for /home/jonas/.globus/userkey.pem:
 +
................++++++
 +
......++++++
 +
Proxy generation succeeded
 +
Your proxy is valid until: 2011-03-11 03:15:04
 +
 
 +
=== Checking proxy lifetime ===
 +
 
 +
The remaining lifetime of a proxy-certificate can be queried using the '''arcproxy''' command using the '''--info''' switch.
 +
 
 +
$ arcproxy --info
 +
Subject: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann/CN=1567862803
 +
Identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
 +
Time left for proxy: 11 hours 55 minutes
 +
Proxy path: /tmp/x509up_u500
 +
Proxy type: X.509 Proxy Certificate Profile RFC compliant restricted proxy
 +
 
 +
Which shows that the proxy certificate is valid for 11 hours 59 minutes.
 +
 
 +
If a GSI proxy was generated the output would be:
 +
 
 +
$ arcproxy --info
 +
Subject: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann/CN=proxy
 +
Identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
 +
Time left for proxy: 11 hours 54 minutes 57 seconds
 +
Proxy path: /tmp/x509up_u500
 +
Proxy type: Legacy Globus impersonation proxy
 +
 
 +
=== Destroying a proxy certificate ===
 +
 
 +
A proxy can be destroyed with the '''-r''' or '''--remove''' switches.
 +
 
 +
$ arcproxy -r
 +
 
 +
or
 +
 
 +
$ arcproxy --remove
 +
 
 +
== ARC 0.8.x ==
 +
=== Creating a proxy certificate ===
 +
 
 +
To create a shortlived proxy that can be used for authentication with grid services, the '''grid-proxy-init''' command can be used. A 12 hour (default) proxy is created in the following example::
 +
 
 +
$ grid-proxy-init
 +
Your identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
 +
Enter GRID pass phrase for this identity:
 +
Creating proxy .................................................... Done
 +
Your proxy is valid until: Tue Jan 25 01:22:59 2011
  
−
<pre>$ grid-proxy-init
 
−
Your identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
 
−
Enter GRID pass phrase for this identity:
 
−
Creating proxy .................................................... Done
 
−
Your proxy is valid until: Tue Jan 25 01:22:59 2011</pre>
 
 
The proxy file itself will be created in the <tt>/tmp</tt> directory with the format <tt>x509up_[uid]</tt>, where uid is the userid number for your user account.
 
The proxy file itself will be created in the <tt>/tmp</tt> directory with the format <tt>x509up_[uid]</tt>, where uid is the userid number for your user account.
  
−
In some cases a longer lived proxy will be needed. This is achieved using the ''-valid'' switch. A 24-hour can be created by issuing the following command:
+
In some cases a longer lived proxy will be needed. This is achieved using the '''-valid''' switch. A 24-hour can be created by issuing the following command:
  
−
<pre>[jonas@localhost ~]$ grid-proxy-init -valid 24:00
+
$ grid-proxy-init -valid 24:00
−
Your identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
+
Your identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
−
Enter GRID pass phrase for this identity:
+
Enter GRID pass phrase for this identity:
−
Creating proxy ................................................... Done
+
Creating proxy ................................................... Done
−
Your proxy is valid until: Thu Feb 10 18:48:34 2011 </pre>
+
Your proxy is valid until: Thu Feb 10 18:48:34 2011
−
== Checking proxy lifetime ==
 
  
−
The remaining lifetime of a proxy-certificate can be queried using the ''grid-proxy-info'' command:
+
=== Checking proxy lifetime ===
  
−
<pre>$ grid-proxy-info
+
The remaining lifetime of a proxy-certificate can be queried using the '''grid-proxy-info''' command:
−
subject  : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann/CN=704530122
+
 
−
issuer  : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
+
$ grid-proxy-info
−
identity : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
+
subject  : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann/CN=704530122
−
type    : RFC 3820 compliant impersonation proxy
+
issuer  : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
−
strength : 512 bits
+
identity : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
−
path    : /tmp/x509up_u500
+
type    : RFC 3820 compliant impersonation proxy
−
timeleft : 0:00:00</pre>
+
strength : 512 bits
−
In this case the proxy has expired. Creating a new proxy-certificate with the ''grid-proxy-init'' command produces the following output from ''grid-proxy-info'':
+
path    : /tmp/x509up_u500
 +
timeleft : 0:00:00
 +
 
 +
In this case the proxy has expired. Creating a new proxy-certificate with the '''grid-proxy-init''' command produces the following output from '''grid-proxy-info''':
 +
 
 +
$ grid-proxy-info
 +
subject  : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann/CN=1908712807
 +
issuer  : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
 +
identity : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
 +
type    : RFC 3820 compliant impersonation proxy
 +
strength : 512 bits
 +
path    : /tmp/x509up_u500
 +
timeleft : 11:59:55
  
−
<pre>$ grid-proxy-info
 
−
subject  : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann/CN=1908712807
 
−
issuer  : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
 
−
identity : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
 
−
type    : RFC 3820 compliant impersonation proxy
 
−
strength : 512 bits
 
−
path    : /tmp/x509up_u500
 
−
timeleft : 11:59:55</pre>
 
 
Which shows that the proxy certificate is valid for 11 hours 59 minutes.
 
Which shows that the proxy certificate is valid for 11 hours 59 minutes.
  
−
== Destroying a proxy certificate ==
+
=== Destroying a proxy certificate ===
 +
 
 +
A proxy certificate can be destroyed using the '''grid-proxy-destroy''' command. This command will essentially just delete the temporary proxy file created with '''grid-proxy-init'''
 +
 
 +
= VOMS certificates =
 +
 
 +
To use the SweStore national storage resources a membership in a virtual organisation, VO, is required. When accessing the storage resources a special grid proxy certificate is required which indicates VO membership. The special proxy certificate requires that it is signed by the virtual organisation management server, VOMS. To enable this signing process, configuration files have to be added to the system. First a '''$HOME/.voms/vomses''' file with the following contents must be added:
 +
 
 +
<pre>"swegrid.se" "voms.ndgf.org" "15009" "/O=Grid/O=NorduGrid/CN=host/voms.ndgf.org" "swegrid.se"</pre>
 +
 
 +
Next the file '''/etc/grid-security/vomsdir/swegrid.se/voms.ndgf.org.lsc''' with the following contents:
 +
 
 +
<pre>/O=Grid/O=NorduGrid/CN=host/voms.ndgf.org
 +
/O=Grid/O=NorduGrid/CN=NorduGrid Certification Authority</pre>
 +
 
 +
== Creating a VOMS proxy (ARC 0.8.x) ==
 +
 
 +
To create a proxy certificate the, '''voms-proxy-init''', command is used. In the following example a voms proxy certificate is created with membership in the '''ops''' group.
 +
 
 +
$ voms-proxy-init -voms swegrid.se:/swegrid.se/ops
 +
 +
Enter GRID pass phrase:
 +
Your identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
 +
Creating temporary proxy ............................................................. Done
 +
Contacting  voms.ndgf.org:15009 [/O=Grid/O=NorduGrid/CN=host/voms.ndgf.org] "swegrid.se" Done
 +
Creating proxy .......................................................... Done
 +
Your proxy is valid until Thu Mar 10 23:14:57 2011
 +
 
 +
== Creating a VOMS proxy (ARC 1.x) ==
  
−
A proxy certificate can be destroyed using the <tt>grid-proxy-destroy</tt> command. This command will essentially just delete the temporary proxy file created with <tt>grid-proxy-init</tt>
+
VOMS proxies in ARC 1.x can be created using the '''arcproxy''' command and the '''-S''' or '''--voms''' switches as shown in the following example:
  
−
== Using Virtual Organisations with VOMS ==
+
$ arcproxy -S swegrid.se:/swegrid.se/ops
 +
Your identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
 +
Enter pass phrase for /home/jonas/.globus/userkey.pem:
 +
.....++++++
 +
............++++++
 +
Contacting VOMS server (named swegrid.se): voms.ndgf.org on port: 15009
 +
Proxy generation succeeded
 +
Your proxy is valid until: 2011-03-10 23:33:06

Latest revision as of 14:28, 8 July 2011

A certificate is the equivalent of a passport in real-life. In the same way you have prove your credentials when you aquire a passport the same is true for a certificate. A Certificate Authority (CA) has to vouch for your identity and sign your certificate.

A certificate consist of 2 parts a private key and a public key. The private is your secret and should be kept as secure as possible. The public key is used to verify signatures are signed with your private key for the receiving part. The public part is also used to verify that the certficate is correct when you have the public part of the CA certificate.

For more information regarding certificates and public key cryptography:

http://en.wikipedia.org/wiki/Public-key_cryptography

http://en.wikipedia.org/wiki/Public_key_certificate

http://www.nordugrid.org/documents/certificate_howto.html

Requesting a certificate

Requesting a certificate using the Terena eScience Portal

The Terena eScience Portal is a joint effort to provide users with a tool for requesting grid-certificate with the credentials from their home-institution or university.

To request a Terena eScience Certificate go to the following URL:

https://tcs-escience-portal.terena.org

The procedure is as follows:

1. Click "Login" 2. Click on Sweden in the map. 3. Choose your identity provider in the drop down box. 4. Login using your credentials from your identity provider.

You should now arrive to a "home" page that shown below:

Terena1.png

5. Click on the "My certificates" link in the top left side of the page. You should then arrive to a page from which you will create and manage your certificates.

Terena2.png

6. To create a new certificate, click on the "New certificate" link and follow the instructions. When the process is completed your certificate will be listed on the same page.

7. Install the signed certificate in your browser by clicking on the "Install in keystore" link. This will install the certificate in the key-store of your browser.

Exporting Terena certificate for use with Grid tools

To use the Terena certificates with the ARC grid client they have to be exported from the browser and converted into a suitable format. To export and convert a certificate installed the following procedure can be used:

1. Export the installed certificate from the browser in the PKCS12 format. In Firefox this is accomplished from the Options/Advanced/Encryption Dialog, shown below:

Browser1.png

To show all installed certificate click on the "View Certificates" buttton. This will shown the following dialog:

Browser2.png

To backup your newly created certificate select the Terena certificate and click on the "Backup" button in the previous dialog. This brings up a dialog for selecting a filename and location for the certificate. Save your certificate in a good location. The file with be given the extension .p12 indicating that it is a PKCS12 certificate. When the location has been selected another dialog is shown asking for a export password. This password will protect the certificate and private key. As show in the next figure:

Browser3.png

Use the password quality meter to choose a strong password for the exported certificate and private key.

2. Converting the PKCS12 certificate to a format suitable for use with grid clients (PEM)

Create a directory, .globus, in your home directory.

Linux / Unix: 

$ cd ~
$ mkdir .globus
$ cd .globus

In windows 

C:\...\>cd C:\Users\<username>
C:\...\>mkdir .globus
C:\...\>cd .globus

Using the "openssl" command we now convert the exported certifcate to the correct format. Windows users: OpenSSL for Windows is available here.

The first step is to convert the private key. The openssl command will first ask for the password chosen when the certificate was exported ("Enter Import Password:"). In the next step the pass phrase for the exported private key is chosen ("Enter PEM pass phrase:"). Please choose a strong passphrase. 

openssl pkcs12 -nocerts -in usercert.p12 -out userkey.pem
Enter Import Password:
MAC verified OK
Enter PEM pass phrase:
Verifying - Enter PEM pass phrase:

In the next step the certificate is converted. In the same way as with the private key we have to specify the export password again ("Enter Import Password:"). 

openssl pkcs12 -clcerts -nokeys -in usercert.p12 -out usercert.pem
Enter Import Password:
MAC verified OK

Before we can use the private key with or client tools the permissions on the private key file (userkey.pem) has to changed to a more restrictive setting (Linux/Unix): 

chmod 400 userkey.pem

Requesting a certificate with ARC tools

The first step in aquiring a certificate is to create a certificate request. This is done using the grid-cert-request -int command. (The -int options means interactive usage). When issued, the tool will generate a certificate request and a private key. The tool will also ask for a password to protect the private key. Note, if the password is lost a new certificate must be obtained. The process is shown below:

First the private key is generated: 

$ grid-cert-request -int
A certificate request and private key is being created.
You will be asked to enter a PEM pass phrase.
This pass phrase is akin to your account password,
and is used to protect your key file.
If you forget your pass phrase, you will need to
obtain a new certificate.

Using configuration from /etc/grid-security/globus-user-ssl.conf
Generating a 1024 bit RSA private key
.....................................++++++
....................++++++
writing new private key to '/home/jonas/.globus/userkey.pem'

To protect the private key from unauthorized access it is encrypted using a pass phrase. If this pass phrase is empty, anyone with access to your private key and certificate can gain access to the resources you have been granted. The pass phrase should also be different from your normal login password, so if your local system has been compromised the private key is still protected.: 

-----
You are about to be asked to enter information that will be
incorporated into your certificate request. What you are about to
enter is what is called a Distinguished Name or a DN. There are
quite a few fields but you can leave some blank For some fields
there will be a default value, If you enter '.', the field will be
left blank.
-----
Level 0 Organization Name (do not modify) [Grid]:
Level 1 Organization Name (do not modify) [NorduGrid]:

The following questions regards your affiliation domain and your email. It is important that your domain and the domain in the email address is the same.: 

Your Domain [example.org]:mydomain.org
Name (e.g., Hans Christian Andersen) []:Joe User
Email address (e.g., h.c.andersen@example.org) []:joe.user@
mydomain.org

Finally the private key and a certificate request are generated.: 

A private key and a certificate request has been generated with
the subject:

/O=Grid/O=NorduGrid/OU=mydomain.org/CN=Joe User/Email=joe.user@
mydomain.org

If the CN=Joe User/Email=joe.user@mydomain.org is not appropriate,
rerun this script with the -force -cn "Common Name" options.

Your private key is stored in /home/joe/.globus/userkey.pem
Your request is stored in /home/joe/.globus/usercert_request.pem

Please e-mail the request to the NorduGrid Certification Authority
ca@nbi.dk You may use a command similar to the following:

  cat /home/jonas/.globus/usercert_request.pem | mail ca@nbi.dk

Only use the above if this machine can send AND receive e-mail. if
not, please mail using some other method.

Your certificate will be mailed to you within two working days. If
you receive no response, contact NorduGrid Certification Authority
at ca@nbi.dk

The result of the command are 3 files userkey.pem , usercert.pem and usercert_request.pem in a subdirectory called .globus in the user home directory. The userkey.pem your private key and should not be world readable. This can be achieved by using chmod 400 userkey.pem.

The contents of the usercert_request.pem should be sent by mail to you neareast Registration Authority (RA) by mail. The RA will verify your request and varify your identity. This can involve meeting with the RA and proving your identity with a passport or equivalent documents. The current list of RA:s can be found at the following page:

[http://ca.nordugrid.org/ra.html http://ca.nordugrid.org/ra.html]

Installing the grid certificate in your browser

When the signed certificate is received from the CA it has to be added to the usercert.pem file in the .globus directory.

The important parts of the mail are shown below:: 

-----BEGIN CERTIFICATE-----
xasdj ...
-----END CERTIFICATE-----

Copy the part shown above into the file usercert.pem in the .globus directory in your home directory.

Requesting a certificate using openssl

If neither the Terena Portal or the ARC tools are available you can use openssl directly to create a certificate request and a private key. Openssl will also ask for a password to protect the private key. Note, if the password is lost a new certificate must be obtained. The process is shown below: 

$ mkdir -p ~/.globus
$ openssl req -new -newkey rsa:2048 \
  -out ~/.globus/usercert_request.pem \
  -keyout ~/.globus/userkey.pem \
  -subj "/O=Grid/O=NorduGrid/OU=nsc.liu.se/CN=Kalle Kula/emailAddress=kalle@nsc.liu.se"

Modify OU, CN and emailAddress as necessary. It is important that your OU and the domain in the email address is the same.

The result of the command are 2 files userkey.pem and usercert_request.pem in a subdirectory called .globus in your home directory. The userkey.pem is your private key and should not be world readable. This can be achieved by using chmod 400 ~/.globus/userkey.pem.

The contents of the usercert_request.pem should be sent by mail to you neareast Registration Authority (RA). The RA will verify your request and verify your identity. This can involve meeting with the RA and proving your identity with a passport or equivalent documents. The current list of RA:s can be found at the following page:

http://ca.nordugrid.org/ra.html

Installing the grid certificate in your browser

When the signed certificate is received from the CA it has to be put into the usercert.pem file in the .globus directory.

The important parts of the mail are shown below:: 

-----BEGIN CERTIFICATE-----
xasdj ...
-----END CERTIFICATE-----

Requesting membership in the SweGrid VO

To be able to use the SweGrid or Swestore resources a membership in the SweGrid VO and a corresponding group is required. To apply for membership, make sure that your certificate is installed in the browser. Then go to the following URL:

https://voms.ndgf.org:8443/voms/swegrid.se

and follow the instructions. In a couple of hours you will be added to the SweGrid VO.

To be added to the correct SNIC project send a mail to support@swegrid.se and specify your DN as shown in the Terena portal or from the arproxy --info command and which SNIC-project to be added to.

To be added to the correct Swestore allocation send a mail to swestore-support@snic.vr.se and specify your DN as shown in the Terena portal or from the arproxy --info command and which Swestore allocation to be added to.

Proxy certificates

Authentication on the grid is done by using special shortlived proxy certificates, which delegate authentication to specific resources. There are serveral tools available for creating, checking and destroying these proxy certificates.

ARC 1.0.x

Creating a proxy certificate

To create a shortlived proxy that can be used for authentication with grid services, the arcproxy command can be used. A 12 hour (default) proxy is created in the following example:: 

$ arcproxy
Your identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
Enter pass phrase for /home/jonas/.globus/userkey.pem:
.++++++
.....++++++
Proxy generation succeeded
Your proxy is valid until: 2011-03-11 03:00:14

The proxy file itself will be created in the /tmp directory with the format x509up_[uid], where uid is the userid number for your user account.

In some cases a longer lived proxy will be needed. This is achieved using the --constraint switch. A 24-hour can be created by issuing the following command: 

$ arcproxy --constraint="validityPeriod=24H"
Your identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
Enter pass phrase for /home/jonas/.globus/userkey.pem:
....++++++
.....++++++
Proxy generation succeeded
Your proxy is valid until: 2011-03-11 15:03:19

$ arcproxy
Your identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
Enter pass phrase for /home/jonas/.globus/userkey.pem:
................++++++
......++++++
Proxy generation succeeded
Your proxy is valid until: 2011-03-11 03:15:04

Checking proxy lifetime

The remaining lifetime of a proxy-certificate can be queried using the arcproxy command using the --info switch. 

$ arcproxy --info
Subject: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann/CN=1567862803
Identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
Time left for proxy: 11 hours 55 minutes
Proxy path: /tmp/x509up_u500
Proxy type: X.509 Proxy Certificate Profile RFC compliant restricted proxy

Which shows that the proxy certificate is valid for 11 hours 59 minutes.

If a GSI proxy was generated the output would be: 

$ arcproxy --info
Subject: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann/CN=proxy
Identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
Time left for proxy: 11 hours 54 minutes 57 seconds
Proxy path: /tmp/x509up_u500
Proxy type: Legacy Globus impersonation proxy

Destroying a proxy certificate

A proxy can be destroyed with the -r or --remove switches. 

$ arcproxy -r

or 

$ arcproxy --remove

ARC 0.8.x

Creating a proxy certificate

To create a shortlived proxy that can be used for authentication with grid services, the grid-proxy-init command can be used. A 12 hour (default) proxy is created in the following example:: 

$ grid-proxy-init 
Your identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
Enter GRID pass phrase for this identity:
Creating proxy .................................................... Done
Your proxy is valid until: Tue Jan 25 01:22:59 2011

The proxy file itself will be created in the /tmp directory with the format x509up_[uid], where uid is the userid number for your user account.

In some cases a longer lived proxy will be needed. This is achieved using the -valid switch. A 24-hour can be created by issuing the following command: 

$ grid-proxy-init -valid 24:00
Your identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
Enter GRID pass phrase for this identity:
Creating proxy ................................................... Done
Your proxy is valid until: Thu Feb 10 18:48:34 2011

Checking proxy lifetime

The remaining lifetime of a proxy-certificate can be queried using the grid-proxy-info command: 

$ grid-proxy-info
subject  : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann/CN=704530122
issuer   : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
identity : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
type     : RFC 3820 compliant impersonation proxy
strength : 512 bits
path     : /tmp/x509up_u500
timeleft : 0:00:00

In this case the proxy has expired. Creating a new proxy-certificate with the grid-proxy-init command produces the following output from grid-proxy-info: 

$ grid-proxy-info
subject  : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann/CN=1908712807
issuer   : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
identity : /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
type     : RFC 3820 compliant impersonation proxy
strength : 512 bits
path     : /tmp/x509up_u500
timeleft : 11:59:55

Which shows that the proxy certificate is valid for 11 hours 59 minutes.

Destroying a proxy certificate

A proxy certificate can be destroyed using the grid-proxy-destroy command. This command will essentially just delete the temporary proxy file created with grid-proxy-init

VOMS certificates

To use the SweStore national storage resources a membership in a virtual organisation, VO, is required. When accessing the storage resources a special grid proxy certificate is required which indicates VO membership. The special proxy certificate requires that it is signed by the virtual organisation management server, VOMS. To enable this signing process, configuration files have to be added to the system. First a $HOME/.voms/vomses file with the following contents must be added: 

"swegrid.se" "voms.ndgf.org" "15009" "/O=Grid/O=NorduGrid/CN=host/voms.ndgf.org" "swegrid.se"

Next the file /etc/grid-security/vomsdir/swegrid.se/voms.ndgf.org.lsc with the following contents: 

/O=Grid/O=NorduGrid/CN=host/voms.ndgf.org
/O=Grid/O=NorduGrid/CN=NorduGrid Certification Authority

Creating a VOMS proxy (ARC 0.8.x)

To create a proxy certificate the, voms-proxy-init, command is used. In the following example a voms proxy certificate is created with membership in the ops group. 

$ voms-proxy-init -voms swegrid.se:/swegrid.se/ops

Enter GRID pass phrase:
Your identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
Creating temporary proxy ............................................................. Done
Contacting  voms.ndgf.org:15009 [/O=Grid/O=NorduGrid/CN=host/voms.ndgf.org] "swegrid.se" Done
Creating proxy .......................................................... Done
Your proxy is valid until Thu Mar 10 23:14:57 2011

Creating a VOMS proxy (ARC 1.x)

VOMS proxies in ARC 1.x can be created using the arcproxy command and the -S or --voms switches as shown in the following example: 

$ arcproxy -S swegrid.se:/swegrid.se/ops
Your identity: /O=Grid/O=NorduGrid/OU=lunarc.lu.se/CN=Jonas Lindemann
Enter pass phrase for /home/jonas/.globus/userkey.pem:
.....++++++
............++++++
Contacting VOMS server (named swegrid.se): voms.ndgf.org on port: 15009
Proxy generation succeeded
Your proxy is valid until: 2011-03-10 23:33:06
Retrieved from "https://docs.snic.se/w/index.php?title=User:Torben_Rasmussen_(NSC)/SweGrid_old/Grid_certificates&oldid=1812"